C*Pix SDC2000 Betriebsanleitung PDF herunterladen (Seite 45)

SDC 2002

3. Operational Preparations

3-29

Operating Instructions - Rev. 1 / 6.2003

3.7. ADJUST FRAME LINE

To achieve a correct vertical picture position for 35mm films press “Framing” key on

the Local Control Panel several times. This effects a coarse correction of the frame

bar downward (1 perforation hole downward per film picture).

Shift frame line until it disappears under the upper or lower picture border.

or via Grahpical Control Panel GCP:

Select the Home menu.

Fig. 334: Home menu with ”Framing Adjust”

Shift frame bar of 35mm film by pressing the framing coarse buttons (arrows up and

down) several times until the frame bar disappears under the upper or lower picture

border.

The framing fine sliders allow neat vertical positioning for all film formats.

Pressing the STORE button enables the current setting to be stored and recalled if

you hit Unity.

Note! For operation, first correct the frame bar and then make film/time code assignment,

because shifting the frame bar by 1 frame will also shift the frame/time code assign-

ment.

When placing the film on the sprocket wheel, take care to lace the frame bar on the

cross line of the sprocket wheel. Thus, the frame bar will not be visible when playing

the film.

Lace-up frame bar on the cross line

Fig. 335: Film position on the sprocket wheel

Shift the fame bar

Store frame bar

position

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 365 366

Keine Kommentare

C*Pix SDC2000 Betriebsanleitung Seite 45