C*Pix SDC2000 Bedienerhandbuch PDF herunterladen (Seite 108)

108 Ignite SDC/HDC Robotic Camera Instruction Manual

Appendix D — Robotic (Pan/Tilt Head)

Default and Recommended Camera ID and IP addresses

The pan/tilt head and JSC-2300 SHOT Director are factory set to default IP

addresses to allow the units to communicate initially. If you are connecting

multiple cameras, you will need to set each camera, one at a time, before

connecting the next camera to the network, to a unique ID and IP address

using the JSC-2300 SHOT Director.

Table 56 lists the default and recommended IP addresses for cameras 1

through 16.

Note The default IP address for the SHOT Director is 192.168.0.100 with a subnet

mask of 255.255.255.0. If you add SHOT Directors to the network, use IP

addresses 192.168.0.101 through 192.168.0.110.

6 DB15 connector

Camera control cable provides serial control and 12 V dc power from the pan/

tilt head to the camera block.

7 DB9 connector

Zoom/focus to lens

8 8” pedestal mount

Extension pedestal mount.

Zero degree pan

registration mark

Used to verify that the pan/tilt head is pointed in the correct direction prior to

mounting.

10 Camera mount L-bracket

Used to mount camera or prompter

Table 56. Default and Recommended IP Addresses for Cameras 1-16

Camera Number/ID Recommended IP Address

CAM16 192.168.0.126 (default)

CAM15 192.168.0.125

CAM14 192.168.0.124

CAM13 192.168.0.123

CAM12 192.168.0.122

CAM11 192.168.0.121

CAM10 192.168.0.120

CAM9 192.168.0.119

CAM8 192.168.0.118

CAM7 192.168.0.117

CAM6 192.168.0.116

CAM5 192.168.0.115

CAM4 192.168.0.114

CAM3 192.168.0.113

CAM2 192.168.0.112

CAM1 192.168.0.111

Table 55. Robotic Pan/Tilt Head Controls and Indicators

Item Name Description

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 121 122

Kommentare zu diesen Handbüchern

Keine Kommentare

C*Pix SDC2000 Bedienerhandbuch Seite 108

Kommentare zu diesen Handbüchern