C*Pix SDC2000 Bedienerhandbuch PDF herunterladen (Seite 109)

Ignite SDC/HDC Robotic Camera Instruction Manual 109

Setting Soft Stops

Soft stops are software adjustable electrical limits for pan and tilt rotation.

• The default soft stops for both pan and tilt are ± 178º.

• If you install a prompter, you must set the tilt soft stops to ± 30º.

• You may also have to change default pan/tilt soft stops to prevent the

camera and/or prompter from contacting an obstacle near the selected

mounting location.

• To change the default soft stops, refer to the JSC-2300 SHOT Director

Robotics/Camera Controller Instruction Manual for procedures.

Specifications

Robotic (pan/tilt head) specifications are listed in Table 57.

Table 57. Robotics Specifications

Pan Range

± 178º

Tilt Range

± 178º

Tilt Range w/ Prompter

± 30º

Pan and Tilt Speed

90º/s

Acceleration

360º/s

Accuracy - Repeatability

30 arc seconds

(0.1” at 60’) (1.4mm at 10m)

Maximum Load Capacity

75.0 lbs. (35 kg)

Noise Rating (@ 30º/s)

<30 dBm @ 1m

Control

Ethernet (10 Base-T)

Control Distance

Unlimited

Control Outputs

4 (TTL)

Power

120/240, 50/60 Hz, 100 W

Weight

20 lbs (9 kg)

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 121 122

Keine Kommentare

C*Pix SDC2000 Bedienerhandbuch Seite 109