C*Pix SDC2000 Bedienerhandbuch PDF herunterladen (Seite 25)

Ignite SDC/HDC Robotic Camera Instruction Manual 25

Installation Procedures

CAUTION Ensure that the selected mounting surface and hardware can safely support

the weight of a fully assembled unit (approximately 55 lbs (29.95 kg)).

3. If ceiling/inverted mounting is required:

• Remove the L-bracket, rotate it 180 degrees, then re-attach it to the

robotic pan/tilt head.

• Attach a safety wire or chain, that can support the

55 lb (29.95 kg)

weight of the fully assembled unit to one of the bolts in the pedestal

mount flange and secure the other end to a rigid part of the ceiling/

mounting location.

4. Attach the robotic pan/tilt head assembly to the selected mounting

location. Use the four mounting holes in the pedestal mount flange as

shown in Figure 7.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 121 122

Keine Kommentare

C*Pix SDC2000 Bedienerhandbuch Seite 25