
28 Ignite SDC/HDC Robotic Camera Instruction Manual
Section 2 — Installation
Camera/Lens Assembly
1. Ensure camera/lens assembly is oriented toward the front of the pan/
tilt head assembly.
2. Mount the camera/lens assembly to the camera adapter plate (if
installing prompter), or directly to the robotic pan/tilt head assembly
L-bracket with two 3/8-16 x 0.5” socket head screws.
Figure 9. Camera/Lens Assembly Mounting
Camera mounting screws
(3/8-16 x 0.5” socket head)
Flat washers
8492_70_r0
Kommentare zu diesen Handbüchern